How to maintain the light steel keel machine equipment commonly used in our daily mechanical production and processing?
1. Our common mistake is to put the equipment into production as soon as it is turned on, just like preheating our car. If the equipment is used immediately without preheating, it will cause the machine to work in cold start mode, thereby shortening the service life of the machine. It is recommended that the equipment be idle for about 5 minutes after starting.
2. The equipment should be placed in a dry and cool place. Do not put it directly on the ground. On the one hand, it is easy to get damp. On the other hand, due to the vibration of the machine, the parts will become loose. Sleepers can be placed under the equipment to play a buffering role.
3. Every time the equipment is used for a period of time, the belt of the pulley needs to be replaced. For parts that are easy to lose, such as gears, we need to replace or add lubricating oil.
4. The electronic control console of the light steel keel equipment cannot be opened with liquid. Once water and liquid flow in, we should stop immediately, remove the control surface, and wipe it clean with a dry towel, otherwise, the circuit board will burn out due to leakage.
In the design process of light steel keel machinery and equipment, the principle of average stress should be followed so that all passes and rollers can be subjected to the same stress, so that the degree of wear will be very balanced and the service life will be extended. Pay attention to the rolling stability of Langfang light steel keel machine equipment. Pay attention to the symmetry of roller processing during design, calculate the denatured neutral layer and material quantity in advance, bending deformation may occur during the production process, which is mainly caused by unbalanced stress. The solution is to accurately balance the stress in design and process.