Brief Introduction of step tile roll forming machine
In nowadays,many constructions become easier,lighter,more economic, this benefits from the development of metal construction materials,one of the most popular material is metal roofing sheets,also called metal tiles,this product is widely used in residents houses ,restaurants,gyms,factories,etc.
Metal step tile is one type of roofing sheets,the advantage of metal step tile is light, easy to install,pretty appearance,and economical,the machine in the below picture is metal step tile roll forming machine ,can make one type step tile.
DESCRIPTION
- Main Material used
Material: Color steel , galvanized steel, or Aluminum
Feeding width:1000mm
Material thickness:0.3-0.6mm
Yield strength:235-450mpa
- Machine composition
| NO. | NAME | UNIT | QUANTITY |
| 1 | 5T manual decoiler | set | 1 |
| 2 | Main roll forming machine | set | 1 |
| 3 | Hydraulic pressing part | set | 1 |
| 4 | Hydraulic cutting part | set | 1 |
| 5 | Product receiving table | set | 1 |
| 6 | PLC control station | set | 1 |
| 7 | Hydraulic oil station | set | 1 |
- Main parameters of metal step tile roll forming machine
| 1 | Raw material | PPGI/PPGL/GI/GL |
| 2 | Raw material thickness | 0.3-0.8mm |
| 3 | Frame | 350H beam steel,18mm thickness middle plate |
| 4 | Roller material | 45# steel,hard chromed on the surface |
| 5 | Shaft material | 45# steel,heat treatment |
| 6 | Shaft diameter | 80mm |
| 7 | Main machine power | 5.5 KW |
| 8 | Voltage | 380V/50HZ/3P (as requested) |
| 9 | Pressing mould material | Cr12 steel,quenched |
| 10 | Cutting blade material | Cr12 steel,quenched |
| 11 | Cutting type | Hydraulic stop cutting |
| 12 | Transmission type | By 1 inch chain |
| 13 | Hydraulic station power | 5.5KW |
Our Advantages
Why we have more orders than other suppliers?
In this field,we have more orders because our machines have many advantages than machines from other suppliers.
1.Hand wheels on both sides can be used to adjust the feeding width.
2.Four stainless rollers can make the material go into the machine smoothly and prevent the scratch on the material surface.
3.There are three rows of orange plastic rollers can make the steel coil go into the machine smoothly.
4.Our PLC control station is stronger and more operator friendly, inside is very neat and there are some Aviation plugs for easier installation.
5.Our raw material and accessories source all use famous Chinese brand, which all have CE, ISO certificates,like bearing,screw/nuts, chain wheels, ect. though these are small parts for the machine,we will ensure the quality to avoid any problems.
Main machine pictures
Product application
